![]() Remove the cable hold down from the stud. Remove the three 10mm bolts securing the wire harness to the valve cover. Undo the four electrical connectors on the coil packs. Undo the two quarter-turn flat heads to uncover the wire harness and coil packs. You'll need a new gasket set from, 10mm socket with a ratchet and extension, flat head screwdriver, 90 degree pick tool, and side cutters. This is the same for a 2001 to 2005 Civic with the 1.7 liter engine. In this video we're going to show you valve cover gasket replacement. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of. Tighten the two plastic flathead screws into the engine coverīrought to you by, your source for quality replacement parts and the best service on the Internet. Insert the two 10mm bolts into the wiring harnessįasten the two 10mm nuts onto the cable retainer ![]() Tighten the four 10mm nuts onto the ignition coilĬonnect the ignition coil wiring harnesses Push the power steering hose into the bracket Put the wiring harness retainer into place Tighten the 10mm bolts to 7.2 foot pounds of torque Put the shorter bolts into the exhaust side of the engine Put the long bolts into the intake side of the engine Slide the valve cover onto the timing cover side, first
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |